/user.svg){kind=small}
/cart.svg){kind=small}
HPE DL38X Gen10 2SFF Premium HDD Front NVMe/SAS/SATA Kit
Kód: 767317Na dotaz
Termín a způsob doručení
Typ příslušenství:Sady nástrojů.Více
/heart.svg){kind=small}
/compare.svg){kind=small}
Vyberte si zvýhodněné balení
Množstevní slevy
/envelope.svg){kind=small}
Dotaz
/bell.svg){kind=small}
Hlídat
/share.svg){kind=small}
Sdílet
Parametry
Výrobce:
Kód:
767317
EAN:
4514953925441
Záruka:
36 Měsíc(ů)
Typ příslušenství:
Sady nástrojů
Popis HPE DL38X Gen10 2SFF Premium HDD Front NVMe/SAS/SATA Kit
HPE DL38X Gen10 2SFF Premium HDD Front NVMe/SAS/SATA Kit
826687-B21: Adds 2 SFF to the Universal Media Bay (826708-B21). Can also be used for rear 2 SFF drive support on 12LFF and 24SFF chassis. An additional riser is required to support NVMe drives in the front, but it is important to note that rear-mounted NVMe and SAS4 drives are NOT supported (due to cooling requirements). A minimum of a single-port internal SAS Controller is necessary when adding a 2SFF HDD Bay, or multiple bays can be driven through a dual-port SAS controller via a SAS Expander. A maximum of up to 30 SFF drives can be supported through a SAS Expander (3 x 8SFF bays, and 3 x 2SFF cages installed into primary, secondary, and tertiary riser bays)..
826687-B21: Adds 2 SFF to the Universal Media Bay (826708-B21). Can also be used for rear 2 SFF drive support on 12LFF and 24SFF chassis. An additional riser is required to support NVMe drives in the front, but it is important to note that rear-mounted NVMe and SAS4 drives are NOT supported (due to cooling requirements). A minimum of a single-port internal SAS Controller is necessary when adding a 2SFF HDD Bay, or multiple bays can be driven through a dual-port SAS controller via a SAS Expander. A maximum of up to 30 SFF drives can be supported through a SAS Expander (3 x 8SFF bays, and 3 x 2SFF cages installed into primary, secondary, and tertiary riser bays)..
